Hey everyone, it’s Mia here, and if you’ve ever picked up a souvenir magnet at a beach shop, mountain gift stand, or city tourist center, chances are you’ve held something my team and I had a hand in creating. For years, I’ve run a small but tight-knit souvenir magnet supply business, and over that time, I’ve had so many customers ask: “How do you make these resin magnets? They’re so durable, and the designs are always perfect.” Today, I’m breaking down exactly how we do it—no fancy jargon, just the real, step-by-step process that we’ve refined over hundreds of custom orders. Souvenir Magnet

First, let’s get one thing straight: resin isn’t the messy, sticky stuff you might remember from a middle school art class. The resin we use for souvenir magnets is a two-part epoxy system—part A is the resin itself, and part B is the hardener, mixed in a precise ratio. If you skip that ratio, or mix them too quickly, you get bubbles that ruin the final piece, and no one wants a magnet that looks like it has tiny air pockets all over it. That’s the first rule I learned early on: patience and measurement are non-negotiable. We mix only small batches at a time, too, because resin starts curing in about 20 minutes, so you can’t make a giant bucket and hope to use it all later. That’s a trick a veteran resin artist taught me when I first started—small batches mean less waste and more control.
Before we even touch the resin, we have to prepare the inserts, because that’s what makes souvenir magnets unique. A generic square clear resin magnet is just that—generic. The ones that sell? The ones that tourists bring home and put on their fridge the next day? They have personal, place-specific inserts. Last month, we did a bulk order for a coastal town that had surfboard-shaped magnets, and their inserts were tiny, high-res photos of the town’s lighthouse, hand-stamped metal tags with the town’s name, and even small pieces of crushed sea glass (collected from the local beach, which made the order extra special). The key here is that inserts need to be completely dry, flat, and free of any oils—if there’s even a drop of water or a smudge from a marker, the resin won’t stick to it, and it’ll float to the top mid-pour. We lay all our inserts out on lint-free cloths, wipe them with a little rubbing alcohol, and let them sit for an hour before using them. That’s a step that’s easy to skip, but it’s how we avoid 90% of the rejects we used to have in the first year of business.
Next, we prep the molds. For souvenir magnets, we use silicone molds because they’re flexible, so the finished magnet pops out easily without cracking. We have molds in all shapes: standard squares and circles, custom cutouts like palm trees, ski boots, skyline outlines, even tiny guitar shapes for Nashville and Austin. We clean each mold with warm soapy water and a soft brush between every use—resin residue build-up will make the finished magnet look cloudy, and no one wants a cloudy souvenir. Once the molds are dry, we lay them out on a level work surface. This is another critical point: if the mold isn’t perfectly level, the resin will pool to one side, and you’ll end up with a lopsided magnet that won’t sit right on a fridge. We keep a small level tool on our workbench at all times, and double-check every single mold before we start pouring.
Now, the actual mixing. Let’s talk ratios first—our epoxy says a 1:1 ratio, so we measure exactly 4 ounces of part A and 4 ounces of part B for each batch. We use clear, plastic graduated cups for this; no guessing with a spoon, no estimating. Once both parts are in the cup, we mix slowly, scraping the sides and bottom of the cup every 30 seconds for a full two minutes. Why two minutes? If you mix too fast, you introduce tiny air bubbles that you’ll have to get rid of later. If you mix too little, the resin won’t cure evenly, and the magnet will stay soft for weeks. After mixing, we let the resin sit for five minutes—this is called “degassing,” and it lets the small bubbles that formed during mixing rise to the top. That’s when we use a little heat gun to pop any remaining bubbles. We hold the heat gun about six inches above the surface, moving it in slow circles—if you hold it too close for too long, you’ll melt the silicone mold or warp the resin. It takes practice, but after a few hundred batches, you get a feel for it.
Here’s the part that makes our magnets stand out: the first layer of resin. We pour a thin, even layer—about an eighth of an inch—into the mold first. Then, we carefully place our inserts into this wet layer. This keeps the inserts from floating, which is the number one mistake new resin makers make. If you just dump the inserts on top of a full layer of resin, they’ll rise to the surface, get tilted, or even move while the resin cures. Once the inserts are in place, we let that first layer cure for about an hour—we’ll check it by gently touching the surface with a toothpick; if it doesn’t stick, it’s ready for the next layer.
Then, we do the top layer. We mix another small batch of resin, degas it, and pour it slowly over the top of the inserts, making sure to cover them completely. We pour in a steady stream, moving the cup around the mold to spread the resin evenly, so it doesn’t create a thick, pooling spot in the middle. Once the top layer is poured, we do another quick pass with the heat gun to pop any new bubbles that rise to the surface. We leave the magnets to cure for 24 hours at room temperature—no rushing this. If you take them out too early, they’ll be soft, scratch easily, and won’t hold up on a fridge door. We keep them in a quiet, draft-free room while they cure; drafts can cause dust to land on the wet resin, and even a tiny speck of dust will ruin the clean finish we want for our souvenirs.
Once the magnets are fully cured, we pop them out of the silicone molds. This part is satisfying—you just flex the mold gently, and the finished magnet slides right out. The next step is attaching the magnet backs. We use high-quality neodymium magnets—they’re strong, so the magnet won’t fall off a fridge door, and they last for years, even if someone slams a grocery bag on it. We cut small pieces of strong, double-sided adhesive tape, stick them to the back of the magnet, then press the neodymium magnet firmly onto the tape. We let them sit for another hour to make sure the adhesive is fully set before packaging. If we skip this waiting time, the magnet back can peel off, and we don’t want a souvenir that stops working after a week.
Wait, I should mention the custom touches we add, too—those small details that make a souvenir feel special, not just another generic magnet. For a winery in Napa, we added tiny, actual wine cork dust to the resin. For a mountain town in Colorado, we used crushed pine needles (cleaned, of course) as inserts. For city skyline magnets, we use printed vinyl decals of the skyline, sealed inside the resin so they don’t fade over time. We work with a lot of local tourist boards and small business owners, so most of our inserts are sourced from the area the magnets represent—this is why our customers love them, because they’re not mass-produced junk.
I’ve had to troubleshoot a lot over the years, too. Like that time we had a batch of cloudy magnets—turns out we used a dirty mold, and resin residue from a previous batch had bonded with the new resin. Or that time half the inserts floated—we didn’t let the first layer cure long enough before adding the inserts. Those mistakes taught us to slow down and follow each step exactly, even when we have a big order to fill. We don’t rush any part of the process, because a good souvenir is something that will remind someone of their trip for years, not just a cheap trinket that breaks after a month.
If you’re reading this and you run a tourist shop, a local business, or you need custom magnets for an event or promotional product, this process is scalable too. We do bulk orders of 100, 500, even 10,000 magnets, and we can work with you on custom shapes, inserts, sizes, and even brand colors. We source all our materials from reputable suppliers that specialize in resin for craft and commercial use, so every batch is consistent.
At the end of the day, making resin souvenir magnets is equal parts science and art. You have to get the measurements right, let the resin cure properly, and pay attention to the small details, but you also get to turn memories—like a family trip to the beach, a weekend skiing in the mountains, a day at a concert—into something tangible that people use every single day.

If you’re interested in placing an order for custom souvenir magnets, or you want to learn more about our process, feel free to reach out to our team to discuss your needs. We’re always happy to work with new partners and help create magnets that highlight your unique location or brand.
Flexible Metal Sheet References:
- The Complete Guide to Resin Crafting for Commercial Applications, Craft & Hobby Association, 2021
- Epoxy Resin Curing and Troubleshooting Manual, Master Bond Inc., 2022
- Sustainable Souvenir Design: Balancing Craft and Durability, Tourism Trends Institute, 2023
- Silicone Mold Preparation and Care for Resin Artists, American Resin Makers Association, 2020
- Neodymium Magnet Adhesion Best Practices for Craft Products, Industrial Magnetics Inc., 2021
Shenzhen Magplus Technology Co., Ltd.
As one of the most professional souvenir magnet manufacturers and suppliers in China, we’re featured by quality products and good service. Please rest assured to wholesale customized souvenir magnet made in China here from our factory. Also, free sample is available.
Address: Room 602, Rujun Building, No.105 Zhongxing Rd, Bantian Street, Shenzhen, China.
E-mail: Iris.huang@newlife.cn
WebSite: https://www.newlifemagplus.com/