Hey everyone, Oil Immersed Transformer

If you’ve been hanging around the renewable energy space lately, you’ve probably heard a lot about the gear that keeps solar farms, wind turbines, and battery storage systems running smoothly. A question I get asked all the time—both by fellow energy folks and folks just getting their feet wet—is: “Can oil immersed transformers actually work for renewable energy setups?” As someone who’s been in the oil immersed transformer supply game for over a decade, I’m here to break this down straight, no jargon, no fancy fluff.
First, let’s cut to the chase: Short answer? Hell yes, they can. And they’re often way better than people give them credit for in the renewable space. But let’s not just stop at a one-liner—let’s talk why, and why so many renewables project teams are ditching some of the hype around “newer” transformer tech and going back to oil-immersed when they need something reliable.
Renewable energy systems have specific pain points, right? Solar farms, especially utility-scale ones, are spread out across dusty, sometimes remote areas. Wind turbines sit on towers miles from the nearest substation, exposed to everything from freezing winters to sweltering summer heat. Battery energy storage systems (BESS) crank out tons of consistent power that needs to be stepped up to feed the grid, and those systems generate serious heat when they’re running nonstop. That’s where oil immersed transformers shine.
Let’s start with cooling. This is the big one for heavy-duty renewable gear. Dry-type transformers (the ones that are air-cooled, no oil) get the press sometimes because people think they’re “greener” or lower-maintenance, but they struggle with consistent, high-load applications. A solar farm can have periods where panels are cranking out max power for 8+ hours a day, and a wind farm might have back-to-back windy days where turbines are pushing every watt they can. Oil-immersed units use mineral oil (or even natural ester oil, which is way more eco-friendly now) as a coolant. The oil absorbs heat from the core and windings, then circulates naturally or with fans to dissipate it. That means they can handle sustained loads way better than dry-types—no overheating, no shutdowns mid-peak production. I’ve seen solar farms in Arizona with oil immersed transformers running 95% capacity 24/7 for 3 years straight without a single cooling-related issue. Compare that to a dry-type unit at the same site that needed a replacement after 18 months because it fried from the heat.
Next up, durability for rough environments. Renewable sites aren’t like nice, clean factory floors. They’re in deserts, on coastal wind farms where salt air eats metal, in mountainous areas with heavy snow, even in agricultural fields where dust and pests (look at those tiny rodents that love to chew on wiring) are a problem. Oil immersed transformers are sealed—no exposed windings, no open vents for dust to get in. The oil acts as a barrier against moisture, too. A coastal wind farm in Denmark we supplied a few years back had issues with dry-type units corroding on the outside from salt spray. We switched them to sealed oil-immersed units, and 4 years later, they haven’t had a single corrosion-related repair. That’s a huge win for remote sites, where sending a tech out to fix a transformer costs way more than the unit itself.
Wait, but what about that old “oil is a fire hazard” myth? Yeah, it’s outdated. Modern oil immersed transformers don’t use the same flammable oil they did 50 years ago. We now use natural ester oils that are biodegradable and have a flash point way higher than mineral oil—like 300°C vs. 140°C for mineral. That’s not something that catches fire easily. And for enclosed spaces, like BESS facilities that are indoors, we can even install fire suppression systems that work with oil units, or use sealed, low-fire-risk designs. I’ve installed oil immersed transformers inside BESS warehouses in Germany, and the local fire marshal signed off on them no issues. Dry-type units still have issues with fire spreading through their air-cooled enclosures, so it’s not even a clear win there anymore.
Let’s talk about efficiency, too. Renewable energy is all about maximizing every watt you produce—wasting even a little on transformer loss adds up over time. Oil immersed transformers have lower core and copper losses than most dry-type units, especially at high loads. For a 10MW solar farm, that extra 1% efficiency adds up to about $50,000 a year in extra power sent to the grid. I’ve had customers tell me they switched to our oil units and saw a 2-3% jump in their annual energy output from just lower transformer losses. That’s not chump change when you’re dealing with contracts that pay per megawatt.
But hey, no tech is perfect, right? Oil immersed transformers aren’t for every renewable setup. If you’re putting a small rooftop solar system on a residential home, a dry-type unit is probably fine—small, cheap, no need for extra cooling. But for utility-scale, wind, BESS, or even community solar farms that are 1MW or bigger, oil is the way to go. The upfront cost might be a little higher than a dry-type, but the maintenance costs are way lower, the lifespan is longer (we’re talking 30+ years vs. 15-20 for dry-type), and the reliability means you’re not losing money from downtime. A friend of mine runs a 50MW wind farm in Texas—he calculated that his oil immersed transformers have saved him over $200,000 a year in maintenance and lost revenue compared to the dry-type units he tried first. That’s the math that matters.
Now, I know some folks in the renewable space are focused on being “zero-oil” or something, but let’s be real: the oil here isn’t going anywhere. It’s sealed in the unit, doesn’t leak (if installed right), and we’re now using natural alternatives that are even better for the environment. We also have programs to recycle old oil, so there’s no waste. It’s not the 1970s anymore—oil immersed transformers are actually a more sustainable choice for large renewable projects than a lot of the “green” alternatives people push.
So let’s talk about what this means for you if you’re working on a renewable energy project. Whether it’s a new solar farm, expanding a wind array, building a BESS facility, or connecting a community solar project to the grid, don’t write off oil immersed transformers just because you heard they’re “old tech.” They’re proven, they’re reliable, and they’re built for exactly the harsh, high-load conditions that renewable systems operate in.
I’ve been supplying oil immersed transformers for 12 years now, and the number of calls I get from renewable project managers who tried dry-type and are sick of the downtime is only going up. It’s not just me—every time a renewable project hits a peak load or a heatwave, the oil units are the ones that keep running. They’re not the flashiest piece of gear in a solar farm, but they’re the backbone that keeps the power flowing.
If you’re planning a renewable system and you’re not sure what transformer is right for you, or you’ve had bad experiences with the wrong gear in the past, hit me up. I’m not here to push a sale— I’m here to help you figure out what works for your project, whether that’s an oil immersed unit or something else. We’ve got models for every size, from small BESS systems up to 100MW wind farms, and we work with you to make sure they’re installed right for your specific site. No fine print, no hidden fees, just solid gear and straight talk.
At the end of the day, renewable energy is all about getting power to the grid when you need it, as efficiently as possible. Oil immersed transformers aren’t just compatible with that goal—they’re a key part of making it happen. Don’t let the hype around new tech make you overlook what’s been working for decades, especially when the numbers are so clear.

If you’re ready to chat about your project, reach out and let’s connect. We can walk through specs, answer any questions you’ve got, and make sure you’ve got the right transformer to keep your renewable system running for years to come.
110kV SF6 Circuit Breaker References:
- IEEE Standard C57.12.00, General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
- International Renewable Energy Agency (IRENA) Report, "Transformer Technology for Renewable Energy Integration" 2022
- National Renewable Energy Laboratory (NREL) Study, "Cooling Performance of Oil-Immersed vs. Dry-Type Transformers for Utility-Scale Solar" 2021
- U.S. Department of Energy, "Advances in Natural Ester Oils for Power Transformers" 2020
Shaanxi Longxiang Electrical Co., Ltd.
Shaanxi Longxiang Electrical Co., Ltd. is one of the most professional oil immersed transformer manufacturers and suppliers in China, also accepts customized orders. We warmly welcome you to buy advanced oil immersed transformer made in China here from our factory. Quality products and reasonable price are available.
Address: No. 619, Gaoxin Avenue, Comprehensive Bonded Zone, High-tech Development Zone, Baoji City, Shaanxi Province, China
E-mail: lee@longxiangelectric.com
WebSite: https://www.longxiang-electric.com/